quiver stereo 1.0.0
Free Max for Live stereo meter

Requires Ableton Live 12.4+, Max 9.1.5+, and Max for Live.
Tested by the user in desktop Ableton Live on macOS.

Unzip and drag quiver stereo.amxd onto an audio track or your Main/Master.
Place it after the processing you want to measure. Audio passes through
unchanged, with no added audio delay. No account or activation required.

The picture shows the stereo field: vertical is mono, horizontal is opposite
polarity, and diagonals show a signal predominantly on one side.
Correlation runs from +1 (matching channels) to -1 (opposite polarity).
Negative readings can indicate cancellation when summed to mono; listen to
mono before deciding whether anything needs changing.
Bass loss estimates the level lost when summing the signal below 120 Hz to
mono. Zero means preserved; about 3 dB is normal for uncorrelated stereo or
a hard-panned signal. It is a measurement, not an automatic fault warning.
Readings average 300 ms. Silence and undefined correlation show a dash.
This meter cannot isolate cancellation between instruments already mixed
together. Use your ears and compare mono alongside the readings.

Free to use on your own computers and in commercial music releases.
Please do not resell. Latest version and support: https://www.quiver.fm/stereo
Copyright 2026 quiver.
